Contact: manager huang
Enterprise QQ: 517371346
Add：Henghe town, cixi city, zhejiang province
Anti - swing inflatable head
Before the conventional gas-filled connector is connected to the gas-filled cylinder, if the charging valve is opened unintentionally, high pressure air will quickly pass through the gas-filled tube, causing the gas-filled head to swing violently, which is likely to cause injuries to personnel.In order to avoid the damage caused by the wrong operation, the anti-swing inflatable head is used.
This simple filling valve is suitable for the end of the compressor charging tube. It comes with an charging head and two handwheel valves to connect the cylinder, control the charging and exhaust respectively. The charging head can be customized in various forms according to your needs.
Emergency stop button
The button can stop the machine quickly in special cases such as machine failure.
There are two basic types of inflating valves in respirator pump.The self-exhaust lever type filling valve and cross type filling valve with independent pressure relief switch.
Pull rod type inflation control valve
The pull rod type inflation control valve has a self-exhaust function and a rubber seal around the pull rod prevents leakage or dust from the lever connection into the valve body.The valve inlet is provided with a strainer to prevent part damage.The valve operation and maintenance is simple, can not remove the gas tube maintenance.The repair kit is equipped with special repair tools. Please contact us for more details.
Lever valves are basically silent during inflation.Pre-installed muffler at vent to reduce exhaust noise (recommended if the charging valve must be operated frequently from the exhaust).Lever valves are basically silent during inflation.Pre-installed muffler at vent to reduce exhaust noise (recommended if the charging valve must be operated frequently from the exhaust).